Notch Manure Forks &

Notch Grapple Manure Forks

                Tine Fork       Tine Fork Grapple

Notch Tine Forks   

• Available Sizes - 60", 66", 72" & 78"
• Removable Forged Tines 39" or 32"
• Tines Per Size 60"-8,  66"-9,  72"-9,  78"-10
• Standard Universal Attachment
• Constructed of High Tensile Steel
• Tines inserted into Tapered Sleeves for Best Tightening
• Sleeve Framed Design for Maximum Strength

Additional Photos

Removable Forged Tines	Standard Universal Attachment

Notch Grapple Tine Forks  

• Available Sizes - 60", 66", 72" & 78"
• Removable Forged Spears 39"
• Tines Per Size 60"-8, 66"-9, 72"-9, 78"-10
• Standard Universal Attachment
• Can Grease at All Pivot Points
• Maximum Jaw Opening 52"
• Twin Hydraulic Cylinders with cased greasable ends
• Hoses included (without cup lings)
• Cylinder Cover Protects Cylinders and Hoses
• Two 1 ¼" pivot pins with greasable bushings
• Constructed of High Tensile Steel
• Tines Inserted into Tapered Sleeves for Best Tightening
• Sleeve Framed Design for Maximum Strength
• Multiple Uses Include Moving Manure, Round or Big Squares, Brush and Other Debris

Additional Photos

Maximum Jaw Opening 52"	Maximum Jaw Opening 52"	Can be Greased at all Pivot Points
1 1/4" Pivot Pins with Bushings (greasable)	Universal Attachment Standard, Other Attachments Available	Special Request Color
Cylinder with Cased Greasable Ends	1 1/4" Pivot Pins with Bushings (greasable)	Special Request Attachment

Notch Rock Buckets &

Notch Grapple Rock Buckets

                                              Rock Bucket                       Grapple Rock Bucket 

                                              Ridge Till Rock Bucket         Dual Grapple Rock Bucket

Notch Rock Buckets  

• Available Sizes - 62"  68"  75" & 82"

• Units Standard With Universal Attachment

• Unique Well Design Holds Collected Rocks

• Three Inch Tine Spacing Allows Dirt To Fall Through

• 1/2" Cutting Edge Design Distributes Force Amongst Tines

• Constructed of High Tensile Steel

• Multiple Uses Include Digging Rocks, Stumps, or Other Debris

Additional Photos

1/2" Cutting Edge Design Distributes Force Amongst Tines	Unigue Well Design Holds Collected Rocks	Standard Universal Attachment

Notch Grapple Rock Buckets   

• Available Sizes - 62" 68" 75" & 82"

• Units Standard With Universal Attachment

• Unique Well Design Holds Collected Rocks

• Three Inch Tine Spacing Allows Dirt To Fall Through

• 1/2" Cutting Edge Design Distributes Force Amongst Tines

• Constructed of High Tensile Steel

• Twin Hydraulic Cylinders with cased greasable ends

• Hoses included (without cup lings)

• Cylinder Cover Protects Cylinders and Hoses

• Two 1 ¾" Pivot Pins with Bushings (greasable)

• Can Grease Bushings at All Pivot Points

• Maximum Jaw Opening 56"

• Multiple Uses Include Digging Rocks, Stumps, Logs, Moving Round Bales or Big Squares, and Other Debris

Additional Photos

Maximum Jaw Opening 56"		1 3/4" Pivot Pins with Bushings (greasable)
Cylinders with cased greasable ends

Notch Dual Grapple Rock Bucket

• Available Sizes - 62" 68" 75" & 82"

• Units Standard with Universal Attachments

• Unique Well Design Holds Collected Rocks

• Three Inch Tine Spacing Allows Dirt To Fall Through

• 1/2" Cutting Edge Design Distributes Forces Amongst Tines

• Constructed of High Tensile Steel

• Hoses included (without cup lings)

• Four 1 ¾" Pivot Pins with Bushings (greasable)

• Cylinder Covers Protect Cylinders and Hoses

• Can Grease Bushings at All Pivot Points

• Maximum Jaw Opening Approximately 56"

• Multiple Uses Include Digging Rocks, Stumps, Logs, Moving Round Bales or Big Square, and Other Debris 

Additional Photos

Unique Well Design Holds Collected Rocks		1 3/4" Pivot Pins with Bushings (greasable)
3" Tine Spacing	Maximum Jaw Opening 56" (approx)

Ridge Till Rock Bucket

The Ridge Till is a specialty item and not listed with our products.

 We are willing to make specialty items upon request.

Additional Photos

Notch Skid Loader Buckets

   Low Profile Dirt    Low Profile Utility    Low Profile Utility XL Low Profile Utility Grapple

                          Material Bucket     Material Bucket with Grapple    High Volume Bucket

Low Profile Dirt Bucket

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 21" high x 36" deep

• 3/4x6 Cutting Edge with holes to accept bolt on cutting edge (sold separately)

• Universal attachment standard  

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  • 60", 66", 72", 78", 84", 90", 96", & 102"

Additional Photos

Box 20" High x 36" Deep	Universal Quick Attachment	3/4" x 6 " cutting edge with holes to accept bolt on cutting edge
Rolled to design, no sharp corners	with Teeth	with Teeth

Low Profile Utility Bucket

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 23 1/2" high x 38" deep or 42" deep

• 3/4x6 Cutting Edge with holes to accept bolt on cutting edge (sold separately)

• Universal attachment standard

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  • 60", 66", 72", 78", 84", 90", 96", & 102"

Additional Photos

Box 20" High x 36" Deep	Universal Quick Attachment	3/4" x 6 " cutting edge with holes to accept bolt on cutting edge
Rolled to design, no sharp corners

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 23 1/2" high x 48" deep

• 3/4x6 Cutting Edge with holes to accept bolt on cutting edge (sold separately)

• Universal attachment standard

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  •  78", 84", 90", 96", & 102"

Additional Photos

3/4" x 6 " cutting edge with holes to accept bolt on cutting edge	Rolled to design, no sharp corners

Low Profile Utility Grapple Bucket

• Available Sizes: 60", 66", 72", 78", 84', 90", 96", 102"

• Recommended for loaders with operating capacity of 3000 lbs or less

• Constructed of high tensile steel

• Bucket 23 1/2"" High x 38" Deep

• All Pivot Points are greasable

• Twin Cylinders with cased greasable ends

• Cylinder covers protect cylinders and hoses

• Two 1 ¼" Pivot Pins with Bushings (greasable)

• Constructed with rolled back

• 3/4"x6" cutting edge with to accept bottom cutting edge

• Universal attachment standard

	Bucket 21" High x 36" Deep	1 1/4" Pivot Pins with Bushings (greasable)
3/4" x 6" cutting edge with holes to accept bottom cutting edge

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 30" high x 42" deep

• 3/4 x6 cutting edge with holes to accept bolt on cutting edge (sold separately)

• Slotted back for better visibility of cutting edge

• Universal attachment standard

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  • 72", 78", 84", 90", 96", 102", 108" & 120"

Additional Photos

Slotted back for better visibility of cutting edge		Box 30" High x 42" Deep
Universal Quick Attachment

Material Bucket with Grapple

Additional Pictures

 High Volume Bucket

• Recommended for loaders with operating capacity of 2,500 lbs or less

• Constructed with rolled back

• Box 44" high x 48.5" deep

• 3/4 x6 cutting edge with holes to accept bolt on cutting edge (sold separately)

• Slotted back for better visibility of cutting edge

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  •  72", 78", 84", 90", 96", 102", 108", 120" & 132"

Additional Photos

Box 44' High x 48.5" Deep	Steps for easy access on both sides of bucket	Slotted back for better visibility of cutting edge
	Universal Quick Attachment

Attachments

Notch Quick Attach Adapter Plate

• Pictured is a Euro Attachment with a Universal Attachment on the front for use with any bucket with a universal Attachment

• Other Loader Attachments Available

Notch Bale Spears

Single      Double       High Double

Triple       Quad         Universal         3 Point Double

Loader Mounted Notch Single

• Frame Designed for Maximum Visibility and Durability   

• Universal Quick Attachment Standard

• Removable Forged Spears

• Single -one spear w/ two stabilizers

• Spear sizes 32", 39", 43" and 49"

• Optional Bale Rest fits all Units

Additional Photos

Single Bale Spears with Dual Stabilizer Spears	Universal Quick Attachment
Removable Spears

 

Loader Mounted Notch Double

• Frame Designed for Maximum Visibility and Durability   

• Universal Quick Attachment Standard

• Removable Forged Spears

• Double - Two Spears (high or low)

• Spear sizes 32", 39", 43" and 49"

• Optional Bale Rest fits all Units

Additional Photos

Two Spears (Low)	Universal Quick Attachment	Two Spears (High)
High Double	Spear Access	High Double with Bale Rest

 

• Frame Designed for Maximum Visibility and Durability   

• Universal Quick Attachment Standard

• Removable Forged Spears

• Triple- 3 Spears

• Spear sizes 32", 39", 43" and 49"

• Optional Bale Rest fits all Units

Additional Photos

Three Spears	Universal Quick Attachment	Triple with Bale Rest

 

• Frame Designed for Maximum Visibility and Durability   

• Universal Quick Attachment Standard

• Removable Forged Spears

• Quad - 4 Spears

• Spear sizes 32", 39", 43" and 49"

• Optional Bale Rest fits all Units

Additional Photos

Four Spears	Universal Quick Attachment	Removable Spear Access
Quad with Bale Rest	Special Request Quad	Special Request Quad
Special Request Quad	Special Request Quad	Special Request Quad

Notch Loader Mounted Universal

• Frame Designed for Maximum Visibility and Durability   

• Universal Quick Attachment Standard

• Removable Forged Spears

• Quad - 4 Spears

• Spear sizes 32", 39", 43" and 49"

• Optional Bale Rest fits all Units

Additional Photos

One 39" Spear and Two 32" Spears	Universal with Bale Rest	Removable Spear Access

 

Notch Three Point Mounted

• Double Spear with category two pins

• Two Forged Spears

• Unit has hitch plate to accommodate 6 BT

Additional Photos

Two Spears	Removable Spear Access

Notch Pallet Forks

• All domestic solid fork tines

• Universal Attachments Standard

• Adjustable forks

Available Sizes

PF37 - for loaders with operating capacity less than 2500 lbs.

Has combined fork capacity 3700 lbs at 24" load center, 48" wide.

 

PF55 - for loaders with operating capacity less than 3000 lbs.

Has combined fork capacity 5500 lbs at 24" load center, 48" wide.

 

Additional Photos

Rolled top design, no sharp corners	Domestic forged fork rail	Adjustable forks accessible from front or back
Universal Attachment Standard, Others available upon request	Special Request Attachment	Special Request Attachment
Special Request Attachment

 

Walk Through Style available